Perfect for liquids and products with a wide viscosity range that contain particulates, Fluid Automatic Pump Fillers accommodate a wide range of container sizes, fill volumes, and product types. These fillers offer greater versatility and easier changeover between fill sizes producing higher production speeds than a piston filler. Dispensing volume with Positive Displacement Pump Fillers is accurately measured by reading the revolutions of the pump and motor assembly. Fill rates can be adjusted by varying the motor speeds with ramp up and ramp down capability guaranteed to result in a clean end to the fill cycle. Available with virtually any number of fill heads to accommodate your unique production needs.

Features

Accuracy – Easy to use and easy to adjust the volume dispensed with a simple control setting
Control pump speed during the fill cycle to guarantee clean filling
Speed – Up to 160 containers per minute
Changeover is quick with ability to store multiple programs in the PLC controller
All machine adjustments are designed for fast changes
Customization – Construction materials, contact parts, pump size, number of fill heads, and other options allow simple customization to your filling needs
Versatility- Modularity and simplicity are intrinsic to the design
Versatile machine options and a wide range of user friendly programs make this filler flexible
True positive displacement filling provides increased filling accuracy with products prone to viscosity change

Accuracy – Easy to use and easy to adjust the volume dispensed with a simple control setting
Control pump speed during the fill cycle to guarantee clean filling
Speed – Up to 160 containers per minute
Changeover is quick with ability to store multiple programs in the PLC controller
All machine adjustments are designed for fast changes
Customization – Construction materials, contact parts, pump size, number of fill heads, and other options allow simple customization to your filling needs
Versatility- Modularity and simplicity are intrinsic to the design
Versatile machine options and a wide range of user friendly programs make this filler flexible
True positive displacement filling provides increased filling accuracy with products prone to viscosity change

Construction: 304 stainless steel heavy-duty tube-style frame
Standard bottom close positive shut off nozzles and easy height adjustment for up to 12″ tall bottles (crank or power)
304 stainless steel fill nozzle bar
Reservoir with sanitary flange fittings
Automatic bottle indexing (pneumatic gates standard)
Power: 230/ 460 VAC, 3 phase amperage dependent on configuration
Operating temperature: 40 °F to 122 °F (5 °C to 50 °C)
Compressed air requirements: < 3 CFM at 80 PSI (< 14 l/min at 5.6 BAR)
Electrical enclosure: NEMA Type 12 is standard, other configurations available

Construction: 304 stainless steel heavy-duty tube-style frame
Standard bottom close positive shut off nozzles and easy height adjustment for up to 12″ tall bottles (crank or power)
304 stainless steel fill nozzle bar
Reservoir with sanitary flange fittings
Automatic bottle indexing (pneumatic gates standard)
Power: 230/ 460 VAC, 3 phase amperage dependent on configuration
Operating temperature: 40 °F to 122 °F (5 °C to 50 °C)
Compressed air requirements: < 3 CFM at 80 PSI (< 14 l/min at 5.6 BAR)
Electrical enclosure: NEMA Type 12 is standard, other configurations available